The closed circuit subsonic wind tunnel has a 36" by 51" test section and a maximum speed of 200 mph. This tunnel is equipped with a six-component strain-gauged balance and computerized data acquisition system.Cognitive field interactionist learning theory flow visualization techniques include a laser light sheet, smoke, helium bubbles, and surface oil streak-line methods. A computerized, two-axis traversing system is available for flow field mapping.Cognitive field interactionist learning theory the test section and operator's station is located in room 1180 of learned hall.

The small water tunnel has a 6” wide, 6” deep and 7’ long channel.Cognitive field interactionist learning theory water is pumped in a closed loop. The maximum speed at the experimental section is 3ft/sec. The turbulence level is 0.5%. This facility is mainly used for education and research.Cognitive field interactionist learning theory it allows particle image velocimetry measurements and dye-based flow visualization. The water tunnel is located in room G445 LEEP2.

The structural dynamics and acoustics laboratory consists of a modal test system and an acoustics data acquisition system.Cognitive field interactionist learning theory the data physics / mescope modal test system is used to determine the vibratory “signature” of structures using vibration data from various sensors, including piezoceramic accelerometers.Cognitive field interactionist learning theory this professional-grade system is augmented by a PC-based national instruments data acquisition system with a high speed (1M sample/sec.) 32-channel analog-to-digital board.Cognitive field interactionist learning theory vibration excitation is provided by both an electrodynamic shaker and a modal hammer. The acoustical data acquisition system is used to measure sound in support of structural acoustics research.Cognitive field interactionist learning theory the system is based on a PC with a 32-channel analog-to-digital board.

Mechanical testing facilities are shared with the departments of mechanical and civil engineering.Cognitive field interactionist learning theory these facilities provide testing capabilities for articles ranging from material coupons to large-scale structures. Available test equipment includes 222 kn and 89 kn MTS servo-hydraulic test machines, a 489 kn instron servo-hydraulic test machine, 267 kn and 107kn baldwin hydraulic test machines and instrumentation including extensometers, load cells, strain gages and digital data acquisition systems.Cognitive field interactionist learning theory additional equipment for experimental stress analysis includes a reflection polariscope and a portable four beam moiré interferometer.

The composite materials laboratory addresses applied and developmental research in environmental remote sensing, energy and transportation.Cognitive field interactionist learning theory this laboratory supports researchers to design and construct aircraft, sensors and systems to enable airborne environmental remote sensing, with the primary funded research addressing ice-penetrating radar that can assist cresis researchers in the quest to capture data and create accurate 3-D maps of ice sheets all the way to the bedrock.Cognitive field interactionist learning theory sensor suites have also been developed for fine scale measurements of terrestrial ecosystem structure and biomass. Past projects include small and large unmanned aircraft, radar arrays and fairings, wind turbine blades, telescopes and fuel containment devices.Cognitive field interactionist learning theory teams of faculty, staff and students in recent years have designed, fabricated and flight-tested unmanned aircraft and manned aircraft sensor suites, predominantly for remote sensing in greenland and antarctica.Cognitive field interactionist learning theory ​".

The composite lay-up facility is a 59 m2 “clean” room with a 6.7 m2 lay-up table and 24.3 m3 of –30° C material storage. The composite tooling and processing laboratory encompasses 128.4 m2, and contains a radial diamond saw, 17.8 cm diamond blade precision sectioning saw, 22.9 cm abrasive cutter, two hydraulic specimen mounting presses, orbital and vibrating polishers and a microhardness tester.Cognitive field interactionist learning theory sample inspection and documentation is aided with a nikon epiphot inverted reflected light photomicroscope capable of magnification to 1000X, with polaroid and 35mm film or digital video capture.Cognitive field interactionist learning theory the composite curing facility encompasses 66.3 m2 and i ncludes an autoclave for curing thermoset and thermoplastic composite materials, 107kn and 667 kn electrically heated water cooled platen presses, and electronically controlled ovens.Cognitive field interactionist learning theory the autoclave is rated to 2.4 mpa and 370° C and has a usable space of 30x30x91 cm. The smallest oven is rated to 370° C and has a usable space of 51x51x46 cm.Cognitive field interactionist learning theory and the intermediate oven is rated to 370C and has a usable space of 1.5m x 1 m x .8m. The composite materials laboratory also houses an electronically controlled walk-in curing oven capable of 260° C, with a usable space of 2.1 x 2 x 6.1 m.Cognitive field interactionist learning theory ​

The nondestructive evaluation laboratory is a shared facility with the department of civil engineering. Available equipment includes a SONIX CSF1000-3X digital 3-axis automated immersion ultrasonic scanning system (pictured at left) with capabilities for A-scan, B-scan and C-scan testing in through-transmission or pulse-echo mode.Cognitive field interactionist learning theory current equipment provides a scanning envelope of 0.8x0.9x1.2 m. In addition, the laboratory houses a combination digital acoustic emission acquisition and analysis, and low frequency ultrasonic generation, acquisition and analysis system.Cognitive field interactionist learning theory acoustic emission and ultrasonic inspection capabilities are enhanced by state of the art data acquisition software running on PC workstations.Cognitive field interactionist learning theory finally, the laboratory has an ultrasonic flaw detector. These systems are used for laboratory and field-testing and inspection of materials and structures.Cognitive field interactionist learning theory

The cognitive control systems laboratory is designed as a one-stop research and development facility for small robots and unmanned aircraft. It features student workstations, a 3D printing equipment, and a protected, indoor flight range with a 14-camera VICON tracking system.Cognitive field interactionist learning theory faculty and students can design, build, and operate robots and unmanned aircraft in this laboratory, while performing research for the goal of cognitively-inspired intelligent machines.Cognitive field interactionist learning theory

The cooperative unmanned systems laboratory (CUSL) is a multi-disciplinary research lab at the university of kansas (KU) that focuses on the design, development, and testing of teams of unmanned systems for cooperative sensing and cooperative control missions.Cognitive field interactionist learning theory the research objectives of CUSL include autonomous system development, gust/wake sensing and wind soaring using uavs, design of cooperative sensing and estimation algorithms, and networked cyber-physical systems.Cognitive field interactionist learning theory

The adaptive aerostructures laboratory (AAL) maintains unique capabilities supporting the design, fabrication and testing of aerospace structures with adaptive materials.Cognitive field interactionist learning theory unlike conventional materials, adaptive materials change some property as a function of an applied control signal or stimulus. The AAL maintains a range of stocks of piezoelectric, electrostrictive, shape-memory-alloy, magnetostrictive, magnetorheological, and other adaptive materials and processing equipment.Cognitive field interactionist learning theory in addition to supporting work with adaptive materials, the AAL has generated many aerospace “firsts” in subscale uninhabited aerial vehicles, morphing aircraft, missles and munitions.Cognitive field interactionist learning theory it is currently host to a unique ballistics laboratory where guided bullets and cannon shells are being designed and tested in the 40mm x 10m and 20mm x 5 m gas guns.Cognitive field interactionist learning theory more than 50 subscale aircraft are housed in the 1200+ sq. Feet facility as well as 9 grades of graphite-epoxy composites, 4 grades of kevlar, composite cure oven, diamond saws and precision post processing machines.Cognitive field interactionist learning theory

In the computational thermal fluids laboratory we develop state-of-the art CFD algorithms and tools on modern computer platforms such as CPU and GPU clusters.Cognitive field interactionist learning theory in addition, we apply these tools to solver challenging fluid dynamics problems such as flow over high lift configurations, helicopters, flow inside jet engines, noise generated by moving bodies, to name just a few.Cognitive field interactionist learning theory our research has been supported by AFOSR, DOE, NSF, DARPA, ARO, NASA, ONR.

The acoustic reverberation suite includes two adjacent, acoustically reverberant (“echoing”) rooms with a 4-foot by 8-foot aperture (“window”) between them.Cognitive field interactionist learning theory the suite is designed to measure transmission loss (TL) for room or vehicle walls and absorption coefficients of sound-absorbing materials used in walls or interior furnishings.Cognitive field interactionist learning theory flat or slightly curved panels are inserted into the aperture to measure the TL when sound—generated and measured in the south room—is transmitted to the north room.Cognitive field interactionist learning theory the difference in the measured sound pressure level (SPL) is resolved as the TL on which the panel noise isolation class (NIC) rating is based.Cognitive field interactionist learning theory alternatively, the acoustic absorption of objects placed in one of the rooms may be measured by comparing the room reverberation time with and without the test objects.Cognitive field interactionist learning theory this facility is currently primarily used to devise and evaluate alternative test methods associated with noise reduction and for testing the noise reduction qualities of panels fabricated with new materials and/or new noise reduction schemes.Cognitive field interactionist learning theory the types of panels to be evaluated include aircraft fuselage side-walls and new building walls. Coefficients of absorption will be measured for various architectural materials including fabric used for variable reverberation control in auditoriums and similar spaces.Cognitive field interactionist learning theory M2SEC

The measurement, materials and sustainable environment center was dedicated in fall 2012. This 47,000 net square-foot building provides a unique opportunity for several engineering and campuswide research groups to work together on projects and to develop commercial applications based on project results.Cognitive field interactionist learning theory the facility is reserved for research purposes and houses the administrative offices of the KU transportation research institute. The $24 million research building is funded in part through a $12.3 million award from the department of commerce’s national institute of standards and technology construction grant program.Cognitive field interactionist learning theory the school of engineering, KU and donors to KU endowment contributed matching funds for the project. Garrison flight research center (airport hangar #1)

cognitive field interactionist learning theory

The garrison flight research center (GFRL) was established in 2004 with the renovation of the existing 18,000 square foot university hangar. The GFRL, now upgraded to 22,000 square feet, has a classroom, machine shop, electronics shop, offices, an AST 4000 fixed base simulator and hangar space for several aircraft.Cognitive field interactionist learning theory these provide resources for developing intelligent vehicle systems for the flight research of both piloted and uncrewed air vehicles. Additional shop and assembly space, along with a propulsion test cell, are available in an adjacent building, the KUAE “hawkworks”.​

cognitive field interactionist learning theory

The garrison flight research center houses the department’s cessna 172 skyhawk and cessna 182 RG. The cessna 172 is used both for transportation and research, while the cessna 182 is dedicated to flight research activities.Cognitive field interactionist learning theory the cessna 182 is specifically configured to accommodate in-flight test instrumentation. Please follow this link to view the university of kansas department of aerospace engineering experimental category aircraft policy.Cognitive field interactionist learning theory

In addition, KUAE has recently invested in an AST 4000 fixed base simulator, produced by american simulation technology. This flight simulator is PC based with programmable LCD instrument panels and programmable digital aircraft dynamic models.Cognitive field interactionist learning theory the “vehicle” can accommodate our experimental autopilot module, and offers an out the window projection system and built-in weather and turbulence effects with a programmable control loader.Cognitive field interactionist learning theory student designed vehicles may be entered in the flight characteristics module such that vehicles may be “flown” and experienced by the design team.Cognitive field interactionist learning theory

The structural load frame is a 35' x 35' test bed located in the garrison flight research center hangar at the lawrence airport. This test bed is capable of point loads up to 4,000 pounds.Cognitive field interactionist learning theory associated with the test floor is a steel frame capable of static testing full-scale aircraft as large as a raytheon baron. The frame is also used to conduct acoustic testing on full-scale aircraft fuselage components.Cognitive field interactionist learning theory

The department of aerospace engineering maintains a research machine shop with two milling machines, a lathe, sheet metal break and shear equipment, band saws and drill presses.Cognitive field interactionist learning theory in addition, the school of engineering maintains a fully-equipped machine shop with multiple milling machines, surface grinders, vertical and horizontal band saws, drill presses, welding equipment, and a paint booth.Cognitive field interactionist learning theory new acquisitions include a stratasys prodigy fused deposition modeling rapid prototyping center and a computer numerically controlled (CNC) mill with five axes of motion and 48" x 20" x 20" travel in translational axes.Cognitive field interactionist learning theory airport hangar #2

The vehicle manufacturing facility includes all the equipment necessary to manufacture and assemble flight vehicles made of aluminum, wood or laminated composites.Cognitive field interactionist learning theory equipment for metal-working include a 4-foot wide break, a 4-foot wide shear, 3 riveting stations with a dedicated compressed air supply, and a drill press.Cognitive field interactionist learning theory woodworking is enabled by a small band saw, a jig saw and a band sander in a room specially designed to capture airborne wood particles. The reconfigurable workspace of approximately 2500 sq ft is ideal for assembly of aircraft with wing spans up to 40 feet.Cognitive field interactionist learning theory